Our Products
Beautiful and professional panel solutions
Menu
Thermal insulation panels with polyurethane insulation occupy an important place in the world of modern construction.
Their characteristics are excellent thermal and sound insulation, fast installation and long service life. The panels consist of two profiled sheets and a thermal insulation filling which can be mineral wool or polyurethane.
Polyurethane-filled panels can be made in PUR and PIR variants. PIR filling has fire resistance up to 60 minutes. Panel thicknesses are produced from 30 to 200mm.
Panels with filling of non-flammable mineral wool class A1 are intended for the construction of buildings where high standards of fire resistance are required.
Thicknesses are produced from 50 to 250mm.
All panels are manufactured to customer order 3 to 12.5m in length.
¬¬¬
The panels are mounted on a placed concrete or steel structure and drilled in the intended places to be fixed to the iron girders.
TOPTERM KP
Roof thermal insulation panel
Roof thermal insulation panels consist of two profiled sheets and a polyurethane filling that has exceptional thermal insulation properties, regardless of whether it is a PUR or PIR filling.
The outside of the panel is trapezoidal profiled sheet metal with 5 ribs and reinforcements, thus achieving a high load-bearing capacity of the roof panel. The inner side is usually done as a linear profile. The minimum slope of the roof surface is 5 ‘or less, if special requirements are met.
Roof panels are produced in thicknesses from 30 to 150 mm, where the customer chooses the color and thickness of the sheet metal.
The net width of the roof panel is 1000mmThe total width of the roof panel is 1017mm
- Micro Profile
- Line Profiling
- Flat Profile
• RAL 9002- gray-white
• RAL 9006- Silver
• RAL 8019- Dark brown
• RAL 7016- Graphite gray
• RAL 3009- Dark red
• RAL 6028- Dark green
• RAL 8004- Copper brown
• RAL 5010- Blue
• RAL 3000- Red
• RAL 9007- Aluminum gray
TOPTERM KPmw
Roof thermal insulation panel made of mineral wool
Roof thermal insulation panels with mineral wool infill are particularly suitable for buildings where fire resistance is required. They consist of two profiled sheets and structural insulation of non-flammable multilayer mineral wool class A1. All three layers form a composite construction product with excellent thermal insulation properties.
Roof panels Topterm KMW panels are produced in the following thicknesses: 50,60,80,100,120,150,180 and 200 mm.
A wide range of sheet metal thicknesses and colors is available to customers.
- Micro Profile
- Line Profiling
- Flat Profile
• RAL 9002- gray-white
• RAL 9006- Silver• RAL 8019- Dark brown
• RAL 7016- Graphite gray
• RAL 3009- Dark red
• RAL 6028- Dark green
• RAL 8004- Copper brown
• RAL 5010- Blue
• RAL 3000- Red
• RAL 9007- Aluminum gray
TOPTERM KP Argo
Roof thermal insulation panel
Roof panel for special purposes of interior space. They are most often used for agro-industry, livestock, and poultry farms.
They consist of an outer lining of plasticized steel sheet and an inner layer of PRVF material. They are specially designed for lining buildings intended for agriculture and livestock. The fiberglass inner lining provides the panel with high resistance to chemical and bacterial influences, as well as good resistance to ragweed.
They are produced in thicknesses of 30.40, 50, and 60 mm.
- Micro Profile
- Line Profiling
- Flat Profile
• RAL 9002- gray-white
• RAL 9006- Silver
• RAL 8019- Dark brown
• RAL 7016- Graphite gray
• RAL 3009- Dark red
• RAL 6028- Dark green
• RAL 8004- Copper brown
• RAL 5010- Blue
• RAL 3000- Red
• RAL 9007- Aluminum gray
TOPTERM KP Flex
Roof thermal insulation panel
Roof panels on one side have trapezoidal profiled sheet metal, and on the other side some of the flexible materials, ie aluminum foil. They have a wide application in covering roofs with an ancient construction, where the installation of this panel solves the insulation of the building and the roof. They can also be used as ceiling panels where thermal insulation and easy maintenance are required.
They are produced in thicknesses of 30.40, 50 and 60 mm.
- Micro Profile
- Line Profiling
- Flat Profile
• RAL 9002- gray-white
• RAL 9006- Silver
• RAL 8019- Dark brown
• RAL 7016- Graphite gray
• RAL 3009- Dark red
• RAL 6028- Dark green
• RAL 8004- Copper brown
• RAL 5010- Blue
• RAL 3000- Red
• RAL 9007- Aluminum gray
TOPTERM FP
Wall panels with hidden screw
Hidden screw wall panels consist of two profiled sheets and polyurethane infill. They are most often used for cladding industrial buildings.
They are produced in three variants of profiling: micro profile, line and flat profiling with PUR or PIR filling.
The standard width of the panel is 100 cm, but a width of 60 cm can also be done, which is especially attractive and desirable with a flat profile with wood imitation.
Wall panel thicknesses are 50, 60, 80, 100 and 120 mm.
- Micro Profile
- Line Profiling
- Flat Profile
• RAL 9002- Gray-white
• RAL 9006- Silver
• RAL 3000- Red
• RAL 7016- Graphite gray
• RAL 9007- Aluminum (dark) gray
• RAL 5010- Blue
• RAL 1019- Beige gray
• RAL 1023- Yellow
• RAL 2004- Orange
• RAL 6017- Yellow green
TOPTERM FPmw
Wall panels with hidden screw
The Topterm FMW concealed screw wall panel consists of two corrugated sheets and a filling of non-flammable multilayer mineral wool class A1.
They are used for buildings that need to meet high requirements in terms of fire resistance.
They are produced in thicknesses of 50,60,80,100,120,150,180 and 200 mm. The standard width of the panels is 100 cm, and the lengths are made according to the customer’s wishes in the range from 3 to 12 m. The panels can be placed horizontally and vertically.
- Micro Profile
- Line Profiling
- Flat Profile
• RAL 9002- gray-white
• RAL 9006- Silver
• RAL 8019- Dark brown
• RAL 7016- Graphite gray
• RAL 3009- Dark red
• RAL 6028- Dark green
• RAL 8004- Copper brown
• RAL 5010- Blue
• RAL 3000- Red
• RAL 9007- Aluminum gray
TOPTERM ZP
Wall panels with visible screw
Wall panels with a visible screw and polyurethane filling are produced in a standard width of 100 cm, but at the customer’s request, panels with a width of 60 and 115 cm can be made. 115 cm wide panels are most often used as container panels. The thicknesses of the wall panels are 30,40,50,60,80,100,120,150,180 and 200 mm. They are available in three profiling variants, with PUR or PIR filling. All panels are of 40 mm and more have a double reinforced joint.
- Micro Profile
- Line Profiling
- Flat Profile
• RAL 9002- Gray-white
• RAL 9006- Silver
• RAL 8019- Dark brown
• RAL 7016- Graphite gray
• RAL 3009- Dark red
• RAL 5010- Blue
• RAL 6028- Dark green
• RAL 8004- Copper brown
• RAL 3000- Red
• RAL 9007- Aluminum gray
TOPTERM ZPmw
Wall panels with visible screw
Wall panels with visible screw and filling of non-flammable multilayer mineral wool class A1 are most often used for making interior partition walls, lining ceilings in industrial buildings, but also as facade panels in cases where fire resistance of the building is required.
The standard width of the panel is 100 cm, but a width of 115 cm can also be done, most often for mobile container facilities. Lengths are made according to the customer’s wishes, and in the range from 2.5 to 12.5 m.
Wall panels are produced in thicknesses of 50,60,80,100,120,150,180,200 and 250 mm in three standard sheet metal profiles.
- Micro Profile
- Line Profiling
- Flat Profile
• RAL 9002- Gray-white
• RAL 9006- Silver
• RAL 8019- Dark brown
• RAL 7016- Graphite gray
• RAL 3009- Dark red
• RAL 5010- Blue
• RAL 6028- Dark green
• RAL 8004- Copper brown
• RAL 3000- Red
• RAL 9007- Aluminum gray
TOPTERM FPP
Ceiling and wall panels
Controlled environment panels or FRIGO panels are used as ceiling and wall panels for chambers and refrigerators in which it is necessary to maintain a constant temperature, and the insulating properties of polyurethane in this case come to the fore. FRIGO panels can be made in thicknesses up to 200 mm.
In addition to line profiling, it is possible to do flat profiling, which is especially important for buildings with strict hygiene requirements.
In addition to plasticised steel sheet, FRIGO panels can also be used with stainless steel sheets.
- Micro Profile
- Line Profiling
- Flat Profile
• RAL 9002- Gray-white
• RAL 9010- White
• STAINLESS STEEL- Stainless steel
Timber Accessories
All sheet metal accessories and edging are made of the same material as the cover. Since each building has specific requirements in terms of aesthetics and functionality, in addition to standard edging, we can also make special ones, according to a sketch submitted by the customer.
The product range includes all the necessary elements for quality drainage of rainwater.
We also offer accompanying elements for roofing works, such as vapor permeable-waterproof foil, polyurethane putty, profile filters, and many others.
Construction Elements
The cold-rolled structural elements we have in our product range are “C” and “Z” beams, which are made of high-quality structural steel sheet, protected on both sides by a layer of zinc of 275 g / m2.
These elements are most often used in the secondary construction of the roof or facade.
They are produced in three variants of profile height, 100,125 and 150 mm.
The use of cold-rolled profiles reduces the weight of the construction, increases the speed of construction, and since they are made of galvanized steel strips, additional anti-corrosion protection is not required.
The profiles are produced to length according to the customer’s request, there is no necessary waste and easy and fast installation is achieved.